Chapter:-08,09,10_BME_Assignment_namodi



  Chapter:8                                                                                                                                  Pumps
  1. With neat sketch explain construction and working of gear pump and screw pump. (04) (Summer 2018) (Winter 2017)
  2. What is priming? Why it is required in centrifugal pump but not in reciprocating pump. (03) (Summer 2017)
  3. With neat sketch explain in brief the working of Vane pump. (03) (Summer 2016)
  4. Differentiate between reciprocating pump and centrifugal pump.(04) (Winter 2017)



Chapter: 9                                                                                                                   Air Compressors
  1.      What are the applications of air compressor? Derive an expression of work done for single stage single acting reciprocating air compressor without clearance. (07) (Summer 2018)
  2.    In air compressor, air enters at 1.013 bar and 270C having volume of 5 m3/ kg and it is compressed to 12 bar isothermally. Determine (i) work done (ii) heat transfer, and (iii) change in internal energy. (07) (Summer 2017)
  3.       What is compressor? Give the classification of Rotary Compressors. (04) (Summer 2017)
  4.       How the air compressors are classified based on different criteria. (04) (Summer 2016)


Chapter:10                                                                                   Refrigeration and Air Conditioning
  1.       Define: One Ton Refrigeration, COP  (Summer 2018,2016)
  2.       Make comparison between vapour compressions and vapour absorption system. (03) (Summer 2018)
  3.       Explain Vapor Compression Refrigeration system with neat sketch. Also draw p-h and T-s diagram for the same. (07) (Summer 2017,2016)
  4.       With neat sketch explain construction and working of split air conditioner. (07) (Winter 2017)




Comments

Post a Comment

Popular posts from this blog

Lancashire Boiler_BME

Image
This type of boiler is used in sugar mills and textile industries where, the steam is    required for power generation as well as for the process work. This boiler is also used in chemical industries. Specifications :  The specifications of one such boiler are as under.            Shell diameter            : 2 to 3 m            Length of shell           : 7 to 9 m  Working pressure      : 16 bar  Steam capacity          : 8000-9000 kg / hr        Efficiency                  :  50 to 70 % Characteristics of boiler :  1.It is horizontal.  2.  It is stationary. 3.  It is fire tube type. 4.  It is internally fired. 5.  It is multi tube boiler. 6.  It has natural circulation of hot gases. 7.  It burns solid fuel. 8.  It is a medium pressure boiler. Working :  The water is fed into the boiler shell through the feed check valve.  The level of the water is adjusted with the help of water level indicator.  Coal is added to the grate through the fire hole.  The coa
Read more

Chapter-4_BME_Assignment_namodi

        Chapter: 4                                                                                            Properties of Steam   Define the following terms: (i) Heat of superheat (ii) Degree of superheat (iii) Critical point (iv) Latent Heat. (04) (Summer 2018)   With a neat sketch explain structure and working of combined separating and throttling   calorimeter and derive the suitable equation for finding the dryness fraction of steam. (07) (Summer 2018)   Explain steam formation with figure also draw T-H diagram. (07) (Summer 2017, Winter 2018)   Define the terms 1.Melting point 2.Boiling point 3.Critical point (03) (Summer 2017) What is throttling calorimeter? Explain its limitation.  (03) (Winter 2018)  Dryness fraction of steam cannot have the value more than unity: Justify  (03) (Winter 2018)   Calculate the total amount of heat required to produce 6 kg of steam at a pressure of 6 bar and temperature of 258 °C from the water at 30 °C. Take specific heat of steam =
Read more

Chapter-3_BME_Assignment_namodi

      Chapter:3                                                                                               Properties of Gases Define: Gas Constant, FAD (Summer 2018) Derive characteristics equation of a perfect gas with the help of Boyle’s law and Charle’s law. (03) (Summer 2018) What is adiabatic process? Prove with usual notations the law of governing adiabatic process as PV γ = Constant. (07) (Summer 2018) (Winter 2017)   Prove that Cp – Cv =R. (03) (Summer 2017,2016) Describe Isothermal process and derive expression for Workdone, Change in Internal energy, Heat transfer and Change in Enthalpy. (07) (Winter 2018)   A cylinder contains 0.6 m3 of a gas at a pressure of 1 bar and 90 °C. The gas is compressed to a volume of 0.18 m3 by the law PVn = C. The pressure of gas at the end of compression is 5 bar.   Calculate: (1)Mass of gas (2) value of index n (3) The change in internal energy of the gas. (4) Work done (5) The heat received or rejected by the gas during t
Read more